HOME - useful tools - knots
Reef
knot
An excellent general purpose knot for tying two pieces of string or twine together, the reef knot is possibly the most commonly used knot for the job, and is easy to learn. However, it cannot be overly stressed that the Reef knot is not a long term or secure knot, and it should only be used to finish parcels or bindings.
Bowline
A commonly used knot to tie a loop in the end of a rope. It has the advantage of not jamming, compared to some other loop forming knots (for example when using an overhand knot on a large bight to form a loop). Form a small loop (the direction is important), and pass the free end of the knot up through the loop, around behind the standing part of the rope, and back down through the loop. Sailorgirls who were Girl Guides should remember, "bunny comes out of the hole, round the tree, and back down the hole again", where the hole is the small loop, and the bunny is the running end of the rope.
Clove hitch Use to attach a rope to a pole, this knot provide a quick and secure result. It rarely jams, and can in fact suffer from the hitch unrolling under tension if the pole can turn. Often used to start and finish lashings.
Figure 8
The stopper knot
The Sheetbend
Commonly
used to tie two ropes of unequal thickness together. The thicker rope
of the two is used to form a bight, and the thinner rope is passed up
through the bight, around the back of the bight, and then tucked under
itself
Round turn and 2 half hitches.
Used
to secure a rope to a pole, or to start or finish a lashing. Pass the
running end of the rope over the pole twice. Then pass the running end
over the standing part of rope, and tuck it back up and under itself,
forming a half hitch. Repeat this for a second half hitch. This knot has
a redeeming feature - it rarely jams!
